When you need an electrician Fargo ND homeowners and businesses call first, our licensed team handles everything from dead outlets to full panel replacements. We serve Downtown Fargo, North Fargo, and the surrounding Cass County area with same-day scheduling and clear, upfront pricing. Call +1 (701) 491-7083 to get started.
Award-winning methodologies that deliver consistent results.
We are a full-service electrical contractor Fargo ND residents and business owners call for everything from a flickering hallway light to a complete service panel rebuild. Our electricians work on homes, rental properties, and commercial spaces throughout Fargo, North Dakota, handling diagnostics, repairs, installations, and code corrections. Every job starts with a clear explanation of what is wrong and what it takes to fix it.
What sets us apart is local experience and accountability. We know the older housing stock near Downtown Fargo often still runs on outdated wiring, while newer builds in North Fargo may have panels that are already overloaded. When you search for a licensed electrician in Fargo ND near me, you get a team that shows up with the right tools, tests the circuit properly, and does not leave until the power is stable and safe.
Project Success
Global Support
From emergency repairs to planned upgrades, we cover the full range of Fargo electrical services for homes and businesses. Whether you need a dead outlet fixed today or a panel replaced this week, we schedule fast and work clean. If you have been searching for affordable electrical repair in Fargo, North Dakota, our upfront pricing and licensed workmanship deliver it.
Dead outlets, flickering lights, tripping breakers, and loose connections are the problems we fix daily. We trace faults with a multimeter and voltage tester, repair or replace damaged wiring, and verify the circuit under load before we leave. Most standard repairs take one to three hours.
Electrical RepairWe install new outlets, switches, ceiling fans, light fixtures, dedicated appliance circuits, and EV chargers. Whether you are finishing a basement in North Fargo or adding circuits to an older Downtown Fargo home, we run Romex wire and conduit cleanly and pull the correct permits.
Electrical InstallationIf your 100-amp panel cannot keep up with modern demand, we upgrade you to 200 amps with a new Square D or Eaton panel. This solves tripping breakers, supports new appliances, and brings your service up to current NEC requirements. Most upgrades are completed in one day.
Electrical Panel UpgradesCorroded, recalled, or failing panels get replaced fast. We remove the old equipment, install a new circuit breaker panel from Siemens or Schneider Electric, label every circuit, and test the whole system. Replacement typically takes four to eight hours depending on the existing wiring.
Electrical Panel ReplacementA breaker that trips constantly or will not reset needs attention before it damages wiring. We diagnose the cause with a circuit breaker finder and GFCI tester, replace faulty breakers, and correct the overloaded circuits behind the problem. Most breaker repairs are done in under two hours.
Circuit Breaker RepairPlenty of contractors will take your call. Fewer will show up on time, explain the problem clearly, and stand behind the work. Here is what you get when you hire us for electrical work in Fargo.
Our electricians hold a North Dakota Electrical License and carry full liability and workers compensation coverage. We follow NEC and NFPA 70E standards on every job, and we pull the required permits so your work passes inspection the first time.
We schedule same-day service for most calls and offer 24/7 emergency electrician Fargo ND dispatch for outages, burning smells, and sparking outlets. Most standard appointments are booked within 24 hours, and emergency calls are answered around the clock.
You get a clear price before we start. No hourly surprises, no padded invoices. Typical 2026 residential repairs in Fargo run $180 to $450, and panel upgrades range from $1,800 to $3,500 depending on amperage and existing wiring.
We use Klein Tools and Fluke meters to test every circuit after the work is done. You get labeled breakers, tidy wire routing, and a walkthrough of what was fixed. If something is not right, our workmanship warranty covers the return visit.
We keep the process simple so you know exactly what happens from the first call to the final test. No guesswork, no surprise charges, no waiting around for a callback that never comes.
Reach us at +1 (701) 491-7083 or request service online. We ask what is happening, how long it has been going on, and whether it is urgent. Most calls are scheduled the same day or next business day.
A licensed electrician arrives with a multimeter, voltage tester, and GFCI tester. We inspect the panel, trace the circuit, and identify the root cause. You get a plain-language explanation and a firm price before any work begins.
We complete the work using quality materials like Romex wire, Leviton devices, and Square D breakers. Most repairs take one to three hours. Panel upgrades and larger installs are scheduled as full-day jobs.
Every circuit gets tested under load before we pack up. We label the breakers, clean the work area, and walk you through what was done. If you have questions later, you can call us directly.
Most calls we get fall into a handful of familiar categories. Here are the issues we fix most often for homeowners and businesses across Fargo and Cass County, and how we handle each one.
A breaker that trips under normal load is telling you the circuit is overloaded or the breaker itself is failing. We test the circuit with a multimeter, check the amperage draw, and either redistribute the load or replace the breaker. If the panel is maxed out, we recommend an upgrade.
Loose connections, backstabbed wiring, and worn-out receptacles cause intermittent power. We pull the outlet, inspect the wiring, and replace damaged devices with new Leviton outlets. Most dead outlet repairs are completed in under two hours.
Flickering lights usually mean a loose neutral or an overloaded circuit. We check the panel connections, tighten lugs, and verify voltage stability. If the issue traces back to the utility feed, we tell you exactly what to report.
Corroded panels and full panels are safety risks. We replace them with a new 200-amp Square D or Eaton panel, move every circuit over, and label the whole board. Most replacements are done in a single day with power restored by evening.
A GFCI that will not reset is either tripped downstream, wired wrong, or worn out. We test with a GFCI tester, check the line and load sides, and replace the device if needed. This is a quick fix, usually under an hour.
Discover our story, values, and what makes us different.
See what our satisfied clients have to say about our services.
"Our breaker kept tripping every time the dryer ran. They came out the same afternoon, found a loose neutral in the panel, and had it fixed in under an hour. Fair price and no upsell."
Homeowner, North Fargo
"We needed a 200-amp panel upgrade for a basement remodel. The crew was on time, pulled the permit, and finished in one day. Everything was labeled and tested before they left. Highly recommend."
Homeowner, Downtown Fargo
"Called at 9 PM when half the house lost power. They walked me through checking the panel and had a tech out within the hour. Turned out to be a failed main breaker. Replaced it that night."
Homeowner, North Fargo
"Had three dead outlets in the kitchen. They traced it to a bad GFCI upstream and replaced it. Also tightened a few loose connections while they were there. Quick, clean, and reasonably priced."
Homeowner, Downtown Fargo
"We manage several rental properties in Fargo and use them for all our electrical repairs. They are reliable, communicate well, and their invoices are always clear. Tenants have never complained."
Property Manager, Fargo
"Flickering lights drove us crazy for months. Two other electricians could not figure it out. These guys found a loose neutral at the meter base and fixed it in one visit. Worth every penny."
Homeowner, North Fargo
We work across Fargo and the surrounding Cass County area, from the older homes and commercial blocks in Downtown Fargo to the residential neighborhoods in North Fargo. If you are near the Red River or just off Main Avenue, we can get to you quickly. We also serve ZIP codes 58102, 58103, and 58104 regularly, with 58105, 58106, and 58107 covered as well. Wherever you are in the metro, our local electrician Fargo team is close by.
Routine and same-week appointments for residents and businesses across Cass County, including the ZIP codes below.
Visit us at our headquarters or contact us to schedule a consultation at your preferred location.
Fargo, North Dakota
+1 (701) 491-7083
These are the questions we hear most from homeowners and business owners across Fargo. If yours is not here, call us at +1 (701) 491-7083.
Most residential electrical repairs in Fargo run $180 to $450 in 2026, depending on the issue and how long it takes. Panel upgrades typically range from $1,800 to $3,500. We give you a firm price before any work starts, so there are no surprises on the invoice.
The best electrician in Fargo is one who is licensed, insured, shows up on time, and explains the work clearly. We hold a North Dakota Electrical License, carry full insurance, and back our work with a warranty. Check our reviews and call us to see for yourself.
Yes, most electrical work in Fargo requires a permit, including panel upgrades, new circuits, and major repairs. We pull the permit for you and schedule the inspection. Skipping the permit can cause problems when you sell your home or file an insurance claim.
Licensed electricians in Fargo must hold a valid North Dakota Electrical License, and reputable contractors carry liability and workers compensation insurance. We meet all of those requirements. You can ask any electrician for their license and insurance details before hiring them.
If you smell burning, see sparks, or have a total power loss, shut off the main breaker and call us at +1 (701) 491-7083. We offer 24/7 emergency electrician Fargo ND dispatch. Do not touch the panel if it is hot or smoking, and keep everyone away until we arrive.
We answer calls 24/7 for emergencies and schedule same-day service for most repairs. Licensed, insured, and upfront on price. Call +1 (701) 491-7083 and get your power back on.